How Do You Hide The Knot When Quilting Machine

Hiding a knot while quilting on the quilting machine is not complex. It is just that you need to follow some proper ideology to make it look professional. You need to learn how to start and finish your stitching on your quilt so that your quilt will be nice and neat. Also, your quilt won’t have any knots. The method is quite simple, and anyone can follow it to achieve a professional finish. This will stop all the bird nests you can sometimes get while beginning with the stitching or quilting. In this article, let’s discuss how to hide the knot while quilting on a quilting machine.

How Do You Hide The Knot When Quilting Machine?

This method is quick and easy, and here is what you need to do.

Step 1 – Firstly, you need to place your quilted piece into the quilting machine. After doing so, you need to drop the presser foot down on the fabric. Asyou don’t want the bobbin thread on the bottom of your quilt that can cause the bird’s nest, you need to hold the top thread and then turn the wheel of your quilting sewing machine.

Step 2 – You need to turn the wheel of the sewing machine to the side of it and then drop the needle down through the fabric. Also, just drop the needle to the downside until it picks up the bobbin thread.

Step 3 – Now, you need to keep turning it until it picks the bobbin thread up there. Next, pull the thread upwards to the end to get both the thread on top of the machine. Now, pull the threads towards the backside.

Step 4 – After this, you need to begin with sewing from that point till you get to the end. Next, you need to pull the project out of your quilting machine, leaving enough thread to tie off. You need to do it till you can see ivory sinus and black to see what you are doing now.

Step 5 – At the end, where you started, pull the thread through so that you can check out both the threads. Both the thread would be on top of the other end, the end where you finished your quilt. Next, you need to pull through the bobbin thread, but you will do it in a moment. You will now take those threads and tie the knot.

Step 6 – A simple knot is the one you can tie, or you can prefer the one that is easier for you to tie on your quilt. Now, take a needle and thread both through the eye of the needle. Now, to thread these threads back, you can use Natas to do it behind it.

Step 7 – You can also make sure that you don’t go through to the back to slip it in behind the knot, also, in the primary betting. Next, you need to make sure that the needle has not come through. So, bring it up and tug at it so that the knot goes in under the primary fabric. Later, tug at it before it is cut so that the thread slips back under the primary fabric.

Step 8 – You will now see no thread showing on the top and the bottom. So, you now need to repeat it on the bottom and pull the top thread until the bobbin thread shows. After that, you again need to tie the knot and then, with threads, slip it in otters or sum up, ensuring that you don’t go back to the backside of the fabric. So, just bring it along.


These were the steps you can follow to hide the knot while quilting on a quilting machine. You can follow the steps, and then at the end, stop sewing with about 1-2 inches of the thread to spare. You should do it unless you become a pro at making these knots. You are also required to loop the thread to attain the professional finish. These steps are not challenging at all, and one can hide the knot perfectly in the quilt.